Linux version 2.4.20-rfs1 (root@jay) (gcc version 2.95.2 20000516 (release) [Rebel.com]) #20 Wed Apr 9 19:25:08 EDT 2003 CPU: StrongARM-110 revision 4 Machine: Rebel-NetWinder On node 0 totalpages: 32768 zone(0): 32768 pages. zone(1): 0 pages. zone(2): 0 pages. Kernel command line: ide0=autotune video=800x600 console=ttyS0,115200 nwconsole=serial netconfig_eth0=disk netconfig_eth1=disk ide_setup: ide0=autotune Console: colour dummy device 80x30 Calibrating delay loop... 166.70 BogoMIPS Memory: 128MB = 128MB total Memory: 127824KB available (1267K code, 280K data, 244K init) Dentry cache hash table entries: 16384 (order: 5, 131072 bytes) Inode cache hash table entries: 8192 (order: 4, 65536 bytes) Mount-cache hash table entries: 2048 (order: 2, 16384 bytes) Buffer-cache hash table entries: 8192 (order: 3, 32768 bytes) Page-cache hash table entries: 32768 (order: 5, 131072 bytes) POSIX conformance testing by UNIFIX PCI: DC21285 footbridge, revision 03, in central function mode PCI: bus0: Fast back to back transfers disabled PCI: Ignore bogus resource 1 [3f6:3f6] of Symphony Labs SL82c105 PCI: Ignore bogus resource 3 [376:376] of Symphony Labs SL82c105 Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket Starting kswapd VFS: Diskquotas version dquot_6.4.0 initialized CyberPro2010: enabling PCI bursts CyberPro2010: 1024KiB VRAM, using 800x600, 35.157kHz, 56Hz Console: switching to colour frame buffer device 100x37 initialize_kbd: Keyboard reset failed, no ACK Detected PS/2 Mouse Port. pty: 256 Unix98 ptys configured keyboard: Timeout - AT keyboard not present?(ed) keyboard: Timeout - AT keyboard not present?(f4) Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled ttyS00 at 0x03f8 (irq = 4) is a 16550A ttyS01 at 0x02f8 (irq = 3) is a 16550A Real Time Clock Driver v1.10e Thermostat: high 55.0, low 53.0, current 53.0 C, fan on. NetWinder Button Driver Version 0.3 (C) Alex Holden 1998. Uniform Multi-Platform E-IDE driver Revision: 6.31 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx W82C105: IDE controller on PCI bus 00 dev 61 W82C105: chipset revision 5 W82C105: 100% native mode on irq 14 ide0: BM-DMA at 0x60a0-0x60a7, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0x60a8-0x60af, BIOS settings: hdc:DMA, hdd:DMA hda: HITACHI_DK229A-10, ATA DISK drive hda: selected PIO 4 (120ns) (0240) ide0 at 0x60c0-0x60c7,0x3f6 on irq 14 blk: queue c01bf640, no I/O memory limit hda: 19640880 sectors (10056 MB) w/512KiB Cache, CHS=19485/16/63, (U)DMA Partition check: hda:hda: dma_timer_expiry: status=0x58 { DriveReady SeekComplete DataRequest } hda: timeout waiting for DMA ide_dmaproc: chipset supported ide_dma_timeout func only: 14 hda: lost interrupt hda: lost interrupt hda: lost interrupt hda: lost interrupt hda: lost interrupt hda: lost interrupt hda: lost interrupt hda: lost interrupt hda: lost interrupt hda: lost interrupt hda: lost interrupt hda: lost interrupt hda: lost interrupt hda: lost interrupt hda: lost interrupt hda: lost interrupt data seg reloc to 0x00004004 <--> 0x00005634 bss seg reloc to 0x00005640 <--> 0x00005AF8 [NeTTrom] Second level jump mode [FB B0=0x00000046][FB B1=0x02000046][FB B2=0x04000046][FB B3=0x06000046] [Kern loc=0x07C00000] [VGA_30=0x00][VGA_71=0x13][VGA_72=0x00] [VGA_B2=0xDB][VGA_B3=0x54] [CMD=ide0=autotune video=800x600 console=ttyS0,115200 netconfig_eth0=disk netconfig_eth1=disk ] Assuming A.OUT kernel Copying 0x0019597B bytes from 0x07C00200 to 0x0000C000 Initrd: scan 0x00195777 bytes @ 0x07C00204. Kernel entry point 0x0000C000 Press '*' TWICE to enter debug......Booting kernel... Linux version 2.4.21-rmkA (root@jay) (gcc version 2.95.2 20000516 (release) [Rebel.com]) #1 Wed Jun 25 19:59:17 EDT 2003 CPU: StrongARM-110 revision 4 Machine: Rebel-NetWinder On node 0 totalpages: 32768 zone(0): 32768 pages. zone(1): 0 pages. zone(2): 0 pages. Kernel command line: ide0=autotune video=800x600 console=ttyS0,115200 netconfig_eth0=disk netconfig_eth1=disk ide_setup: ide0=autotune Console: colour dummy device 80x30 Calibrating delay loop... 166.70 BogoMIPS Memory: 128MB = 128MB total Memory: 127812KB available (1272K code, 289K data, 240K init) Dentry cache hash table entries: 16384 (order: 5, 131072 bytes) Inode cache hash table entries: 8192 (order: 4, 65536 bytes) Mount cache hash table entries: 512 (order: 0, 4096 bytes) Buffer-cache hash table entries: 8192 (order: 3, 32768 bytes) Page-cache hash table entries: 32768 (order: 5, 131072 bytes) POSIX conformance testing by UNIFIX PCI: DC21285 footbridge, revision 03, in central function mode PCI: bus0: Fast back to back transfers disabled PCI: Ignore bogus resource 1 [3f6:3f6] of Symphony Labs SL82c105 PCI: Ignore bogus resource 3 [376:376] of Symphony Labs SL82c105 Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket Starting kswapd VFS: Diskquotas version dquot_6.4.0 initialized CyberPro2010: enabling PCI bursts CyberPro2010: 1024KiB VRAM, using 800x600, 35.157kHz, 56Hz Console: switching to colour frame buffer device 100x37 Detected PS/2 Mouse Port. pty: 256 Unix98 ptys configured Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled ttyS00 at 0x03f8 (irq = 4) is a 16550A ttyS01 at 0x02f8 (irq = 3) is a 16550A Real Time Clock Driver v1.10e Thermostat: high 55.0, low 53.0, current 54.0 C, fan on. NetWinder Button Driver Version 0.3 (C) Alex Holden 1998. ne2k-pci.c:v1.02 10/19/2000 D. Becker/P. Gortmaker http://www.scyld.com/network/ne2k-pci.html eth0: Winbond W89C940F found at 0x6080, IRQ 21, 00:10:57:00:1A:B7. Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx W82C105: IDE controller at PCI slot 00:0c.1 W82C105: chipset revision 5 W82C105: 100% native mode on irq 14 ide0: BM-DMA at 0x60a0-0x60a7, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0x60a8-0x60af, BIOS settings: hdc:DMA, hdd:DMA hda: HITACHI_DK229A-10, ATA DISK drive hda: selected PIO 4 (120ns) (0240) hda: DMA enabled blk: queue c01c1b94, no I/O memory limit ide0 at 0x60c0-0x60c7,0x3f6 on irq 14 hda: attached ide-disk driver. hda: host protected area => 1 hda: 19640880 sectors (10056 MB) w/512KiB Cache, CHS=19485/16/63, (U)DMA Partition check: hda:<4>hda: dma_timer_expiry: dma status == 0x63 hda: dma_timer_expiry: status=0x58 { DriveReady SeekComplete DataRequest } hda: lost interrupt hda: dma_intr: bad DMA status (dma_stat=70) hda: dma_intr: status=0x50 { DriveReady SeekComplete } hda: lost interrupt hda: dma_timer_expiry: dma status == 0x61 hda: timeout waiting for DMA hda: timeout waiting for DMA hda: (__ide_dma_test_irq) called while not waiting hda: status error: status=0x58 { DriveReady SeekComplete DataRequest } hda: drive not ready for command hda: DMA enabled hda1 hda2 hda3 hda4 NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 1024 buckets, 8Kbytes TCP: Hash tables configured (established 8192 bind 8192) NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. NET4: AppleTalk 0.18a for Linux NET4.0 NetWinder Floating Point Emulator V0.97 (double precision) hda: dma_timer_expiry: dma status == 0x61 hda: timeout waiting for DMA hda: timeout waiting for DMA hda: (__ide_dma_test_irq) called while not waiting hda: status error: status=0x58 { DriveReady SeekComplete DataRequest } hda: drive not ready for command hda: DMA enabled hda: dma_timer_expiry: dma status == 0x61 flushing ide devices: hda data seg reloc to 0x00004004 <--> 0x00005634 bss seg reloc to 0x00005640 <--> 0x00005AF8 Checking 256 megs/ 4 banks...no Checking 128 megs/ 2 banks...no Checking 128 megs/ 4 banks...yes [NeTTrom] Ver. 2.3.3-rfs2 (c) 1997,1998,1999,2000 REBEL.COM [NeTTrom] Built on Jun 6 2002 08:47:00 [NeTTrom] Bios version 00.00.01. [NeTTrom] Detected Memory 0x08000000 bytes in 0x00000004 banks, board id 59FF. [NeTTrom] FootBridge Vendor ID [0x00001011] Device ID [00001065] rev.[03] [NeTTrom] WinBond IDE Vendor ID [0x000010AD] Device ID [00000565] rev.[10] [NeTTrom] Ether10 Vendor ID [0x00001050] Device ID [00005A5A] rev.[00] [NeTTrom] IGS CyberPro Vendor ID [0x000010EA] Device ID [00002010] rev.[01] [NeTTrom] Initializing kbd...[KBD]: Keyboard reset failed, no POR [NeTTrom] Mapping in /romdev/vga..VGA option regs(30 71 72): 000000. Video RAM: Detecting bus width...32 bit Video RAM: Detecting size...[4MB=NO][2MB=NO][1MB=YES]